/etc/rc.local hdparm disk spindown asetukset

#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

# hdparm -B255 -S60 /dev/sdb
# set disk spindown timers to 1,5 hours (-S243) or 1h (-S242) or 30min (-S241)
# to check spin status: "hdparm -C /dev/sd?"
# hdparm -S242 /dev/sdb &
# hdparm -S242 /dev/sdc &
# hdparm -S242 /dev/sdd &
# hdparm -S242 /dev/sde &
# hdparm -S242 /dev/sdf &
# hdparm -S242 /dev/sdg &
# hdparm -S242 /dev/sdh &
# hdparm -S242 /dev/sdi &
# hdparm -S242 /dev/sdj &
# hdparm -S242 /dev/sdk &
# hdparm -S242 /dev/sdl &

# hdparm -B255 -S60 /dev/sdb
# TOIMII hdparm -B253 -S242 /dev/sdb

hdparm -B127 -S241 /dev/sdb

hdparm -S241 /dev/sda
#toimii WD Whiteillä

exit 0